Browser demo
See how it looks and feels
A cut-down demo that runs in your browser, so you can see the live view before you install anything: wires light up with their voltage, current moves, the scope draws, and you can change a value while the circuit runs.
- WWire tool: click a pin, the corners, the end
- Drag from a pin: a wire
- Drag a part: move it
- DelDelete
- CtrlZUndo
- SpaceRun or pause
- Click a part: change its value
- One finger: scroll the page
- Two fingers: move and zoom the circuit
- Tap a part: change its value
- Wire button, then tap a pin, the corners, the end
Twelve circuits to start with
Each one is an example that ships with the app, with notes on the sheet saying what to watch and what to change. The app has more than 700, and in the app you can also build your own.
Your own circuit
The demo can also play a circuit made in the app, from a file or from a link. It plays it; building it happens in the app.
Open a file
Drop a .bsc file on the simulator above, or press Open file in its top bar. The file is read in your browser and never leaves your computer.
Share a link
In the app, File > Share link puts the whole circuit inside a link to this viewer. Whoever clicks it sees your circuit running here, with nothing uploaded anywhere. Links open here from version 0.8.2.
Send one file
File > Export interactive HTML writes a single .html file with the viewer and the circuit inside. It opens in a browser with no internet connection.
A demo of the basics. The app is the real thing.
The demo only plays circuits. The app is where you design them, measure them and check them against ngspice.
In this demo
- The live view: voltage on every wire, current dots, the scope, FFT and logic views
- The Inspector: change a value while the circuit runs
- Timebase, run and pause, and Exact, Balanced and Fast quality
- Microcontrollers running their program
- Wires: draw them (W), move parts, delete (Del), undo and redo (Ctrl+Z, Ctrl+Y)
- Nothing you change is saved
Only in the app
- Placing new parts from the full symbol set, sheets, buses, labels and saving
- Simulate with F5: transient, AC sweep, DC sweep, operating point, parameter step, FFT, Monte Carlo, worst case, noise, pole-zero and loop gain
- Measurements with pass and fail limits, reports, and every result checked against ngspice
- 169,574 vendor models from more than 70 manufacturers, and a wizard to build your own parts
- 17 calculators that place their circuit, import from KiCad, EasyEDA Pro and LTspice, and AI agents that build and test circuits