BetterSPICE 0.8.1 · User manual
User manual
Everything the app does, how to learn it and how to get a job done: 76 chapters in eight parts, a task index, a glossary and an index. Press / to search it.
How do I…
More jobs, in your own words: the task index. Words with a set meaning: the glossary. Everything else: the index.
Contents
ILearn
Install, a guided first circuit in two parts, a vendor model, a part of your own, and how BetterSPICE thinks. Read it in order once.
- 01Install and startHow-to
- 02Tutorial 1: Draw an RC filter and watch it runTutorial
- 03Tutorial 2: Measure it exactlyTutorial
- 04Tutorial 3: A regulator with a vendor modelTutorial
- 05Tutorial 4: Make a part with the Part WizardTutorial
- 06How BetterSPICE thinksExplanation
- 07A tour of the windowExplanation
- 08The guided toursExplanation
IIHow do I…?
One page per job, titled by the goal. Each says what you need first, gives the steps, what you should see, what to do if it doesn't work, and where to read more.
IIIFix a problem
Something stopped, reads 0 V or looks wrong. Find what you see on the screen, then the cause and the fix. Every diagnostic code is here too.
IVQuick reference
The one-sheet card, every keyboard shortcut grouped by task, and a glossary of the words this manual uses.
VThe app in detail
Every window, menu, pane, tool and analysis field, in the order they appear on screen.
- 20The window in detailReference
- 21Menus and the command paletteReference
- 22Drawing and editingReference
- 23Hierarchical sheets and busesReference
- 24The library and model searchReference
- 25The inspector, values and slidersReference
- 26Live simulationReference
- 27Probes, scopes and the dockReference
- 28Simulate (F5) and its enginesReference
- 29Analyses and their setup fieldsReference
- 30The Analysis viewReference
VIParts and models
Every device with every parameter, its unit, default, range and where its value comes from. Digital logic, control blocks, transmission lines, the model catalogue, the model dialog, the Part Wizard and the symbol editor.
- 31Devices: passivesReference
- 32Devices: sourcesReference
- 33Devices: semiconductorsReference
- 34Devices: amplifiers, power blocks and ICsReference
- 35Devices: relays, switches, motors and audioReference
- 36Devices: sensors, optoelectronics and displaysReference
- 37Devices: power ICs, drivers and protectionReference
- 38Devices: batteries, board parts and analog blocksReference
- 39Devices: interface chips, switches and microcontrollersReference
- 40Digital logicReference
- 41Programmable control blocksReference
- 42Programming the MCUReference
- 43Transmission lines, PCB traces and cablesReference
- 44The model catalogueReference
- 45The model dialogReference
- 46Part WizardReference
- 47Symbol editor and My partsReference
VIIDesign calculators
The calculator window, then each of the 17 calculators: its Simple and Advanced views, every field, result, check and warning, the library pickers, how it places and checks its circuit in the simulator, its method and sources, and worked examples.
- 48The calculator windowReference
- 49Voltage dividerReference
- 50Low pass and high pass filtersReference
- 51LC resonance and QReference
- 52ReactanceReference
- 53Time constantReference
- 54Attenuator padsReference
- 55LED resistor and LED driverReference
- 56Op-amp gainReference
- 57555 timerReference
- 58Buck and boost stageReference
- 59Crystal load capacitorsReference
- 60Heatsink and junctionReference
- 61Trace current and widthReference
- 62Via current and parasiticsReference
- 63Trace impedanceReference
- 64Wire gauge and fusingReference
- 65dB and unit converterReference
VIIIFiles and integration
The circuit, part and symbol file formats, importing KiCad and EasyEDA Pro, exporting pictures, netlists and reports, AI agents, and the bspice command line.
IXLists and data
Example circuits worth opening first, every Part Wizard template field, environment variables, install details and how the engine is verified.