Source code coming soon. The GitHub repository is private for now and opens to everyone very soon.
BetterSPICE Beta 0.8.1 Join the beta Download soon

Compare

BetterSPICE vs LTspice

LTspice is the free SPICE simulator from Analog Devices. BetterSPICE is a newer free simulator that runs while you draw. This page puts the two side by side, says where LTspice is the better choice, and names the source of every fact about LTspice.

Checked on 18 November 2026. BetterSPICE beta 0.8.1 (0.8.0 on macOS). LTspice facts are from Analog Devices' LTspice page as archived on 17 September 2026; the sources are listed at the bottom.

The short answer

Choose LTspice when you want a mature, released program you can download today, when your design is built on Analog Devices parts and you want ADI's own models and ready-to-run demo circuits, or when you start from one of ADI's design tools that export LTspice schematics.

Try BetterSPICE when you want to see the circuit answer while you change it, when you need Linux packages, when you want to open a KiCad or EasyEDA Pro schematic as it is, or when you want the numbers checked against ngspice signal by signal. LTspice schematics import too, so you don't have to choose for good.

Side by side

BetterSPICELTspice
Made byThe BetterSPICE project, open source (the repository opens soon)Analog Devices
PriceFree, also at workFree (ADI: "Fast, Free, Unlimited")
LicenseGNU AGPL v3.0 with the Commons Clause: use it for any purpose, change and share it; selling BetterSPICE itself is not allowed (license)Free download from Analog Devices
VersionBeta 0.8.1, 17 November 2026 (0.8.0 on macOS)26.0.2 for Windows 10/11 x64, macOS and Windows 11 ARM64
SystemsWindows 10 and 11 x64; macOS 11 or later on Apple Silicon; Ubuntu and Debian, Arch, NixOS and an AppImage for other LinuxWindows 10/11 x64, Windows 11 ARM64 and macOS. No Linux download is listed.
DownloadComing soon, with the GitHub repository. Join the beta for the installers now.Available now from analog.com
How it runsThe circuit runs while you draw: wire colours follow the voltage, dots show the current, values change while it runs. F5 runs the full analysis on the same schematic.You run a simulation and explore the results in the built-in waveform viewer.
AnalysesTransient, AC, DC sweep, operating point, parameter step, FFT, noise, pole-zero, loop gain, Monte Carlo, worst caseADI's tutorials cover transient, AC and noise, with .step and .meas directives
EngineOwn engine in Rust (the live view compiled to WebAssembly), with ngspice 47 for vendor modelsA SPICE simulator, in ADI's words "powerful, fast, and free"
Models169,574 vendor models from Texas Instruments, Analog Devices, Infineon, Vishay and more than 60 other makers. LTspice, PSpice and HSPICE dialects are converted on the way in.Models and macromodels for select Analog Devices products, and ready-to-run demo circuits
Checked againstngspice, on 438 test circuits every release: 3,797 of 3,797 signals passNot stated on ADI's page
OpensKiCad 6 to 10, EasyEDA Pro, LTspice .asc; exports SPICE netlistsLTspice schematics; ADI's Signal Chain Designer, Analog Filter Wizard, Photodiode Wizard, Precision ADC Driver Tool and LTpowerCAD export them
Also in the box17 design calculators, a microcontroller part that runs code against the pin voltages, an energy meter, a command line and an MCP server for AI agentsSchematic capture and waveform viewer
HelpA 695-page manual, online and as PDFVideo tutorials, articles and the EngineerZone forum

The LTspice column holds only what Analog Devices' LTspice page says. Where it says nothing, the cell says so.

Where LTspice is stronger

  • It is a released, mature program that you can download now. BetterSPICE is a beta, and its public downloads open together with the GitHub repository.
  • Analog Devices makes it, with models for its own parts and a library of ready-to-run demo circuits for them.
  • ADI's design tools, LTpowerCAD among them, export LTspice schematics directly.
  • It has a Windows 11 ARM64 build. BetterSPICE runs on x64 Windows and on Apple Silicon Macs.
  • It has a large set of video tutorials and articles, some going back to 2015, and a support forum on ADI EngineerZone.
  • ADI calls it fast. We have not measured BetterSPICE against LTspice, so this page gives no speed comparison.

Where BetterSPICE is different

  • It runs while you draw. Change a part and the circuit answers; there is no edit, run, plot loop. A simplified demo runs in your browser.
  • The numbers are checked. Operating points agree with ngspice to better than 1 part in 1011 on 95 % of values, on 438 test circuits. See Accuracy.
  • It opens other tools' files. KiCad 6 to 10, EasyEDA Pro and LTspice. How the KiCad import works.
  • It runs on Linux with packages for Ubuntu and Debian, Arch and NixOS, and an AppImage.
  • It designs as well as simulates. 17 calculators place the circuit they designed and check it in simulation.
  • Its source is open under the AGPL v3.0 with the Commons Clause, once the repository opens.

Bring your LTspice files

File > Import reads LTspice .asc schematics, and dropping one on the window does the same. Each part gets the model LTspice itself would use: the .model lines on the schematic, the files it includes and LTspice's standard libraries. Symbols come from the .asy files next to the schematic or from an installed LTspice. A value such as 200 is 200 Ω, as in LTspice.

On LTspice's 61 example schematics, the imported connections match LTspice's own netlists. Hierarchical blocks and digital gates come in as boxes.

LTspice's astable multivibrator imported into BetterSPICE: its symbols and wiring, two 2N3904 transistors, and a transient where the oscillation starts
LTspice's astable multivibrator example, imported and simulated with its two 2N3904s.

And ngspice and Qucs-S?

ngspice is the open source SPICE simulator. Its own site says it does not provide schematic entry: you give it a netlist on the command line or in a file, and third-party programs add a schematic. BetterSPICE uses ngspice 47 under Simulate for vendor models, and checks its own engine against ngspice on every release. When the two disagree, the job is to find out which one is right.

Qucs-S is a schematic program with a Qt GUI that drives an outside simulation kernel: ngspice (the one its makers recommend), Xyce, QucsatorRF or SpiceOpus. It is GPL-2.0 open source, at version 26.1.1, with packages for Linux, Windows and FreeBSD and Homebrew for macOS.

BetterSPICEngspiceQucs-S
What it isSchematic editor with its own live engine, and ngspice for the full analysis of vendor modelsSimulator, netlist in, results outSchematic GUI for outside simulators
Schematic editorYesNo, third-party front endsYes
Runs while you drawYesNoNo
LicenseAGPL v3.0 with the Commons ClauseOpen sourceGPL-2.0
SystemsWindows, macOS, LinuxWindows binaries; Linux, Cygwin, FreeBSD and Homebrew for macOSLinux, Windows, FreeBSD, Homebrew for macOS

Sources

  1. Analog Devices, LTspice (product and download page), as archived on 17 September 2026: description, versions and systems, demo circuits, models, design tools that export LTspice schematics, tutorials and forum.
  2. ngspice, ngspice.sourceforge.io, read on 18 November 2026: open source, no schematic entry, operating systems.
  3. Qucs-S, ra3xdh.github.io and the GitHub repository (license GPL-2.0), read on 18 November 2026.
  4. BetterSPICE: the user manual, its import chapter and verification chapter, and the license.

LTspice is a registered trademark of Analog Devices, Inc. BetterSPICE is not affiliated with Analog Devices.

See it run

Open a circuit in the simplified demo in your browser, or join the beta for the app.