Calculators Circuit
Reactance calculator (XL and XC)
Pick an inductor or a capacitor. The calculator gives its reactance at a frequency, XL = 2πfL or XC = 1 / (2πfC), and works backwards too: the part value for a reactance, or the frequency where a part has the reactance you want.
These are the reactances of ideal parts. A real capacitor has series inductance and a real inductor has winding capacitance, so past their self-resonance the curves turn over.
The calculator
The formulas it uses
These are the formulas the calculator shows, copied from its source code. The results in the window above come from the same code as the app.
Inductive reactance
- XL = 2πfL
- L = XL / (2πf)
- f = XL / (2πL)
Capacitive reactance
- XC = 1 / (2πfC)
- C = 1 / (2πfXC)
- f = 1 / (2πCXC)
Sources. Reactance of ideal parts. A real capacitor has ESL and a real inductor winding capacitance: past their self-resonance the curves turn over.
Simple and Advanced
Simple is the main values, one set of results and a plot. Advanced is the full design view: the operating range with its corners, tolerance and temperature, checks with their margin (a green tick, an amber warning or a red cross), the parts to order with the ratings they need, warnings that give the fact, the number and the fix, and plots over the whole range. A value typed in one view is the same in the other.
In the app it also places the circuit and checks it
In the app, the buttons under the result act on your circuit: Place the check and run AC analysis. The circuit is drawn with library symbols, wires, a source and probes, placed at a free spot in the view, and the analysis that checks it runs at once. With parts selected, Apply to the selected parts writes the result into them, as one undo step.
The last tab of the Advanced view, Verify in simulation, places the calculator's circuit and runs it, with measurements whose pass limits are the calculator's own numbers. A row the simulator cannot check says so and why. More in the manual: Reactance.