Source code coming soon. The GitHub repository is private for now and opens to everyone very soon.
BetterSPICE Beta 0.8.1 Join the beta Download soon

Calculators PCB

Wire gauge calculator: ampacity, voltage drop and fusing current

Give the wire by AWG or by cross section in mm², solid or stranded, and its length. The calculator gives the resistance at the wire temperature and the voltage drop, from the ASTM B258 diameters and 100 % IACS copper.

The current a wire can carry comes from a heat balance of the insulated wire in still air (natural convection, radiation and the insulation wall) at the rating of the insulation you pick, from PVC 70 °C to PTFE 200 °C. For a fault it gives the Onderdonk current that melts the wire in a given time and the Preece limit.

The calculator

The app's own calculator window, built from the BetterSPICE 0.8.1 source. What needs a schematic is greyed out here: placing the circuit, running it, applying values to parts and picking parts from the library. Open it in its own window.

The formulas it uses

These are the formulas the calculator shows, copied from its source code. The results in the window above come from the same code as the app.

Wire formulas

  • d (mm) = 0.127 · 92^((36 − AWG) / 39)
  • R = (ρ(T) · L) / A
  • ρ(T) = 1.7241e-8 Ω m · (1 + 0.00393 (T − 20))
  • I fuse = A · √( log10(1 + (1083 − Ta) / (234 + Ta)) / (33 t) )
  • I melt = 10244 · d^1.5 (d in inch)

Sources. AWG diameters and copper resistance: ASTM B258 (100 % IACS, 1.7241e-8 Ω m, 0.393 % per K). Ampacity: a heat balance of the insulated wire in still air (Churchill and Chu natural convection, radiation, the wall as a thermal resistance) at the rating of the insulation, within 8 % of NEC Table 310.17 for a single conductor in free air. Fusing: W. M. Onderdonk (adiabatic, I = A √(log10(1 + (Tm − Ta) / (234 + Ta)) / 33 t), A in circular mil) and Preece (I = K d^1.5, K = 10244 for copper, d in inch). Stranded wire: strand area times count, 2 % longer for the lay.

Simple and Advanced

Simple is the main values, one set of results and a plot. Advanced is the full design view: the operating range with its corners, tolerance and temperature, checks with their margin (a green tick, an amber warning or a red cross), the parts to order with the ratings they need, warnings that give the fact, the number and the fix, and plots over the whole range. A value typed in one view is the same in the other.

In the app it also places the circuit and checks it

In the app, the buttons under the result act on your circuit: Add the wire as a resistor in series and run.

The last tab of the Advanced view, Verify in simulation, places the calculator's circuit and runs it, with measurements whose pass limits are the calculator's own numbers. A row the simulator cannot check says so and why. More in the manual: Wire gauge and fusing.