Calculators Parts
Heatsink and junction temperature calculator
Enter the power, the thermal resistances junction to case, case to heatsink and heatsink to ambient, and the ambient temperature. The resistances add in series: Tj = Ta + P (θJC + θCS + θSA), and the case and heatsink temperatures follow the same way.
Turned around, the calculator gives the heatsink you need: the θSA that keeps the junction at its limit, (Tj,max − Ta) / P minus θJC and θCS. This is the series thermal resistance model of JEDEC JESD51-1 and the semiconductor makers' thermal notes.
The calculator
The formulas it uses
These are the formulas the calculator shows, copied from its source code. The results in the window above come from the same code as the app.
Formulas
- Tj = Ta + P · (θJC + θCS + θSA)
- Tc = Ta + P · (θCS + θSA)
- Ts = Ta + P · θSA
- θSA = (Tj,max − Ta) / P
- minus θJC and θCS for the heatsink needed at the limit.
Sources. Series thermal resistance model (JEDEC JESD51-1 and semiconductor thermal application notes such as TI SPRA953): the resistances add, temperature rise is power times resistance.
Simple and Advanced
Simple is the main values, one set of results and a plot. Advanced is the full design view: the operating range with its corners, tolerance and temperature, checks with their margin (a green tick, an amber warning or a red cross), the parts to order with the ratings they need, warnings that give the fact, the number and the fix, and plots over the whole range. A value typed in one view is the same in the other.
In the app it also places the circuit and checks it
In the app, the buttons under the result act on your circuit: Add the result as a note.
The last tab of the Advanced view, Verify in simulation, places the calculator's circuit and runs it, with measurements whose pass limits are the calculator's own numbers. A row the simulator cannot check says so and why. More in the manual: Heatsink and junction.
Goes with this one
All 17 calculators
Circuit
Parts
- LED resistor
- Op-amp gain
- 555 timer
- Buck and boost stage
- Crystal load capacitors
- Heatsink and junction